aluminum electrolytic capacitors (smd type) surface mount type series: ha type: v endurance : 105 1000 h vibration-proof product (30g guaranteed) is available upon request (8 Q) rohs compliant example : 6.3 v.dc 22 f marking color : black unitmm ?the dimensions of the vibration-proof products, please refer to the page of the mounting specification. following limits. stabilized at +20 , capacitors shall meet the limits specifi ed in endurance. frequency correction factor for ripple current hight-temperature assuranceize features specifications capacitance range 1 f to 1500 f category temp. range C40 to +105 6.3 v.dc to 100 v.dc rated voltage range capacitance tolerance 20 % (120 hz / +20) leakage current i Q 0.01 cv or 3 (a) after 2 minutes (whichever is greater) dissipation factor (tan ) please see the attached characteristics list z (-25 ) / z (+20 ) shelf life after storage for 1000 hours at +105 2 with no voltage applied and th en being (with voltage treatment) characteristics at low temperature endurance 8 4 35 50 63 2 2 3 3 3 4 design and specifications are each subject to change without noti ce. ask factory for the current technical specifications befor e purchase and/or use. should a safety concern arise regarding this product, please be su re to contact us immediately. 10-sep-19 after reflow soldering and then being stabilized at +20 , capacitors shall meet the capacitance change resistance to soldering heat within 10 % of the initial value dissipation factor (tan ) within the initial limit dc leakege current within the initial limit 0.70 frequency (hz) correction factor 1.70 1.30 1.00 10 k to 1 k 120 50, 60 marking i w p k dimensions l a, b h d size code after applying rated working voltage for 1000 hours at +105 2 and the n being capacitance change dissipation factor (tan ) dc leakege current within 20 % of the initial value (6.3 v.dc of miniature : 30 %) Q 200 % of the initial limit within the initial limit rated voltagev.dc impedance ratio at 120 hz 100 3 4 6.3 10 16 25 z (-40 ) / z (+20 ) 4 3 2 2 6 4 stabilized at +20 , capacitors shall meet the following l imits. 5.0 5.3 2.2 1.5 0.35 c b 6.5 max. 4.0 4.3 5.5 max. 0.650.1 0.650.1 6.3 6.6 2.6 1.8 0.35 d d 7.70.3 6.3 6.6 7.8 max. 7.8 max. 0.650.1 g 3.4 2.2 0.35 8.0 8.3 3.4 3.1 e 10.20.3 6.20.3 8.0 8.3 12.0 max. 10.0 max. 9.5 max. r.voltage code unitv.dc a 10 h 50 c 16 j 63 35 25 v e +0.15 -0.20 0.900.2 0.900.2 0.650.1 0.650.1 f 100 80 2a k +0.15 0.700.2 0.700.2 -0.20 3.5 4.6 10.0 10 10.20.3 -0.20 +0.15 5.4 5.4 5.4 -0.2 +0.1 -0.2 +0.1 -0.2 +0.1 -0.20 +0.15 -0.20 +0.15 2.6 1.8 0.35 1.8 1.0 0.35 22 j ha ha s 0.3 max. d 0.5 l h a 0.2 b 0.2 w i p i k negative polarity marking ( C) capacitance ( f) series identification rated voltage code lot number mark for lead - free products (black dot) pressure relief 10and larger ( )reference size downloaded from: http:///
$ o x p l q x p ( o h f w u r o \ w l f & |